We – EPG Team the largest gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 different branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Truck Crane Payload 100 Ton
I. Characteristic
• Methods guarantee the sleek, higher efficiency and power conservation of the lifting, rotation, and luffing methods.
• The torque limiter adopts colourful screen, realizing the intelligence of the failure diagnosis. The precision is forward of the business.
II. Parameter
Total fat in vacation | kg | 54900 52400 |
Axle 1 | kg | 7500 7500 |
Axle two | kg | 7500 7500 |
Axle three | kg | 8300 10000 |
Axle four | kg | 12000 12500 |
Axle five | kg | 12000 12500 |
Energy | ||
---|---|---|
Motor rated electrical power | kW/(r/min) | 360/1800 (306/1900) |
Motor rated torque | N.m/(r/min) | 2200/1300 (2571/1200) |
Engine rated pace | r/min | 1800 (1900) |
Min. ground clearance | mm | 310 |
Vacation | ||
Technique angle | ° | 20 |
Departure angle | ° | 14 |
Bra ept distance (at 30km/h) | m | ≤10 |
Max. grade ability | % | 40 |
Min. turning diameter | m | 24 |
Gas consumption for 100km | L | 70 |
Major performanceTorque Limiters for Chain and Belt Drives Prevent harm from overloading. When overloaded, these limiters trigger your sprocket or pulley to slip. Once the overload is removed, the limiters immediately reset. Set the torque inside the variety detailed. Friction discs are between the hub and stress plate. Double-spring limiters have a 2nd spring for handling practically two times the torque of single-spring limiters. | ||
Max. rated whole lifting potential | m | one hundred |
Min. rated wor ept radius | three | |
Turning radius at turntable tail | ||
Counterweight | mm | 4200 |
Aux. winch | mm | 4590 |
Max. lifting torque | 3450 | |
Base growth | kN.m | 3450(4m×88t) |
Fully prolonged increase | kN.m | 1950(24m×7.1t) |
Fully prolonged growth+ jib | kN.m | 1230(19.2m×6t) |
Outrigger span (entire extension) | ||
Longitudinal | m | seven.56 |
Lateral | m | 7.6 |
Lifting peak | ||
Base increase | m | thirteen.five |
Completely prolonged boom | m | 50.9 |
Fully prolonged growth+ jib | m | 70.4 |
Boom length | m | 13.5 |
Fully extended boom | m | 51 |
Totally prolonged growth+ jib | m | fifty one+eighteen.1+four |
Wor ept speed | ||
Jib placing angle | ° | ,fifteen,30 |
Growth luffing time | s | seventy five |
Growth | ||
Increase telescoping time | ||
Total extension | s | a hundred and sixty |
Max. swing speed | r/min | 2 |
Outrigger extension/retraction time | ||
Outrigger beam in extension/retraction | s | 26/33 |
Outrigger jack in extension/retraction | s | 46/50 |
III. PACKING
The use of authentic tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the outlined replacement areas contained herein are not sponsored, authorized, or created by the OEM.