Product Description
Product Description
Ball Screw Drive Shafts for Heavy Industrial Gearboxes WABseries in Operation FuBao
HangZhou Fubao Electromechanical Technology Co., Ltd. heavy industrial gearboxes is a new generation of practical products independently developed by our company:
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
heavy industrial gearboxes characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the heavy industrial gearboxes. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
| WAB series parameters | Model number | WAB042 | WAB60 | WAB090 | WAB115 | WAB140 | WAB180 | WAB220 |
| Rated output torque | 14-22 | 23-60 | 48-160 | 140-330 | 342-650 | 520-1200 | 1140-2000 | |
| Reduction ratio | L1: 3, 4, 5, 6, 7, 8, 9, 10 L2: 15, 20, 25, 30, 35, 40, 50, 70, 80, 100 | |||||||
| Planetary gear backlash | L1: P0≤1 P1≤3 P2≤5 L2: P0≤3 P1≤5 P2≤7 | |||||||
Detailed Photos
Product Details
Other products
Product Advantages
Compared with other reduction machines, heavy industrial gearboxes machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics,heavy industrial gearboxes is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
Company Profile
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.
Factory Display
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery, Medical Robot |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can drive shafts be adapted for use in both automotive and industrial settings?
Yes, drive shafts can be adapted for use in both automotive and industrial settings. While there may be some differences in design and specifications based on the specific application requirements, the fundamental principles and functions of drive shafts remain applicable in both contexts. Here’s a detailed explanation:
1. Power Transmission:
Drive shafts serve the primary purpose of transmitting rotational power from a power source, such as an engine or motor, to driven components, which can be wheels, machinery, or other mechanical systems. This fundamental function applies to both automotive and industrial settings. Whether it’s delivering power to the wheels of a vehicle or transferring torque to industrial machinery, the basic principle of power transmission remains the same for drive shafts in both contexts.
2. Design Considerations:
While there may be variations in design based on specific applications, the core design considerations for drive shafts are similar in both automotive and industrial settings. Factors such as torque requirements, operating speeds, length, and material selection are taken into account in both cases. Automotive drive shafts are typically designed to accommodate the dynamic nature of vehicle operation, including variations in speed, angles, and suspension movement. Industrial drive shafts, on the other hand, may be designed for specific machinery and equipment, taking into consideration factors such as load capacity, operating conditions, and alignment requirements. However, the underlying principles of ensuring proper dimensions, strength, and balance are essential in both automotive and industrial drive shaft designs.
3. Material Selection:
The material selection for drive shafts is influenced by the specific requirements of the application, whether in automotive or industrial settings. In automotive applications, drive shafts are commonly made from materials such as steel or aluminum alloys, chosen for their strength, durability, and ability to withstand varying operating conditions. In industrial settings, drive shafts may be made from a broader range of materials, including steel, stainless steel, or even specialized alloys, depending on factors such as load capacity, corrosion resistance, or temperature tolerance. The material selection is tailored to meet the specific needs of the application while ensuring efficient power transfer and durability.
4. Joint Configurations:
Both automotive and industrial drive shafts may incorporate various joint configurations to accommodate the specific requirements of the application. Universal joints (U-joints) are commonly used in both contexts to allow for angular movement and compensate for misalignment between the drive shaft and driven components. Constant velocity (CV) joints are also utilized, particularly in automotive drive shafts, to maintain a constant velocity of rotation and accommodate varying operating angles. These joint configurations are adapted and optimized based on the specific needs of automotive or industrial applications.
5. Maintenance and Service:
While maintenance practices may vary between automotive and industrial settings, the importance of regular inspection, lubrication, and balancing remains crucial in both cases. Both automotive and industrial drive shafts benefit from periodic maintenance to ensure optimal performance, identify potential issues, and prolong the lifespan of the drive shafts. Lubrication of joints, inspection for wear or damage, and balancing procedures are common maintenance tasks for drive shafts in both automotive and industrial applications.
6. Customization and Adaptation:
Drive shafts can be customized and adapted to meet the specific requirements of various automotive and industrial applications. Manufacturers often offer drive shafts with different lengths, diameters, and joint configurations to accommodate a wide range of vehicles or machinery. This flexibility allows for the adaptation of drive shafts to suit the specific torque, speed, and dimensional requirements of different applications, whether in automotive or industrial settings.
In summary, drive shafts can be adapted for use in both automotive and industrial settings by considering the specific requirements of each application. While there may be variations in design, materials, joint configurations, and maintenance practices, the fundamental principles of power transmission, design considerations, and customization options remain applicable in both contexts. Drive shafts play a crucial role in both automotive and industrial applications, enabling efficient power transfer and reliable operation in a wide range of mechanical systems.
What safety precautions should be followed when working with drive shafts?
Working with drive shafts requires adherence to specific safety precautions to prevent accidents, injuries, and damage to equipment. Drive shafts are critical components of a vehicle or machinery’s driveline system and can pose hazards if not handled properly. Here’s a detailed explanation of the safety precautions that should be followed when working with drive shafts:
1. Personal Protective Equipment (PPE):
Always wear appropriate personal protective equipment when working with drive shafts. This may include safety goggles, gloves, steel-toed boots, and protective clothing. PPE helps protect against potential injuries from flying debris, sharp edges, or accidental contact with moving parts.
2. Lockout/Tagout Procedures:
Before working on a drive shaft, ensure that the power source is properly locked out and tagged out. This involves isolating the power supply, such as shutting off the engine or disconnecting the electrical power, and securing it with a lockout/tagout device. This prevents accidental engagement of the drive shaft while maintenance or repair work is being performed.
3. Vehicle or Equipment Support:
When working with drive shafts in vehicles or equipment, use proper support mechanisms to prevent unexpected movement. Securely block the vehicle’s wheels or utilize support stands to prevent the vehicle from rolling or shifting during drive shaft removal or installation. This helps maintain stability and reduces the risk of accidents.
4. Proper Lifting Techniques:
When handling heavy drive shafts, use proper lifting techniques to prevent strain or injuries. Lift with the help of a suitable lifting device, such as a hoist or jack, and ensure that the load is evenly distributed and securely attached. Avoid lifting heavy drive shafts manually or with improper lifting equipment, as this can lead to accidents and injuries.
5. Inspection and Maintenance:
Prior to working on a drive shaft, thoroughly inspect it for any signs of damage, wear, or misalignment. If any abnormalities are detected, consult a qualified technician or engineer before proceeding. Regular maintenance is also essential to ensure the drive shaft is in good working condition. Follow the manufacturer’s recommended maintenance schedule and procedures to minimize the risk of failures or malfunctions.
6. Proper Tools and Equipment:
Use appropriate tools and equipment specifically designed for working with drive shafts. Improper tools or makeshift solutions can lead to accidents or damage to the drive shaft. Ensure that tools are in good condition, properly sized, and suitable for the task at hand. Follow the manufacturer’s instructions and guidelines when using specialized tools or equipment.
7. Controlled Release of Stored Energy:
Some drive shafts, particularly those with torsional dampers or other energy-storing components, can store energy even when the power source is disconnected. Exercise caution when working on such drive shafts and ensure that the stored energy is safely released before disassembly or removal.
8. Training and Expertise:
Work on drive shafts should only be performed by individuals with the necessary training, knowledge, and expertise. If you are not familiar with drive shafts or lack the required skills, seek assistance from qualified technicians or professionals. Improper handling or installation of drive shafts can lead to accidents, damage, or compromised performance.
9. Follow Manufacturer’s Guidelines:
Always follow the manufacturer’s guidelines, instructions, and warnings specific to the drive shaft you are working with. These guidelines provide important information regarding installation, maintenance, and safety considerations. Deviating from the manufacturer’s recommendations may result in unsafe conditions or void warranty coverage.
10. Disposal of Old or Damaged Drive Shafts:
Dispose of old or damaged drive shafts in accordance with local regulations and environmental guidelines. Improper disposal can have negative environmental impacts and may violate legal requirements. Consult with local waste management authorities or recycling centers to ensure appropriate disposal methods are followed.
By following these safety precautions, individuals can minimize the risks associated with working with drive shafts and promote a safe working environment. It is crucial to prioritize personal safety, use proper equipment and techniques, and seek professional help when needed to ensure the proper handling and maintenance of drive shafts.
How do drive shafts contribute to transferring rotational power in various applications?
Drive shafts play a crucial role in transferring rotational power from the engine or power source to the wheels or driven components in various applications. Whether it’s in vehicles or machinery, drive shafts enable efficient power transmission and facilitate the functioning of different systems. Here’s a detailed explanation of how drive shafts contribute to transferring rotational power:
1. Vehicle Applications:
In vehicles, drive shafts are responsible for transmitting rotational power from the engine to the wheels, enabling the vehicle to move. The drive shaft connects the gearbox or transmission output shaft to the differential, which further distributes the power to the wheels. As the engine generates torque, it is transferred through the drive shaft to the wheels, propelling the vehicle forward. This power transfer allows the vehicle to accelerate, maintain speed, and overcome resistance, such as friction and inclines.
2. Machinery Applications:
In machinery, drive shafts are utilized to transfer rotational power from the engine or motor to various driven components. For example, in industrial machinery, drive shafts may be used to transmit power to pumps, generators, conveyors, or other mechanical systems. In agricultural machinery, drive shafts are commonly employed to connect the power source to equipment such as harvesters, balers, or irrigation systems. Drive shafts enable these machines to perform their intended functions by delivering rotational power to the necessary components.
3. Power Transmission:
Drive shafts are designed to transmit rotational power efficiently and reliably. They are capable of transferring substantial amounts of torque from the engine to the wheels or driven components. The torque generated by the engine is transmitted through the drive shaft without significant power losses. By maintaining a rigid connection between the engine and the driven components, drive shafts ensure that the power produced by the engine is effectively utilized in performing useful work.
4. Flexible Coupling:
One of the key functions of drive shafts is to provide a flexible coupling between the engine/transmission and the wheels or driven components. This flexibility allows the drive shaft to accommodate angular movement and compensate for misalignment between the engine and the driven system. In vehicles, as the suspension system moves or the wheels encounter uneven terrain, the drive shaft adjusts its length and angle to maintain a constant power transfer. This flexibility helps prevent excessive stress on the drivetrain components and ensures smooth power transmission.
5. Torque and Speed Transmission:
Drive shafts are responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). Drive shafts must be capable of handling the torque requirements of the application without excessive twisting or bending. Additionally, they need to maintain the desired rotational speed to ensure the proper functioning of the driven components. Proper design, material selection, and balancing of the drive shafts contribute to efficient torque and speed transmission.
6. Length and Balance:
The length and balance of drive shafts are critical factors in their performance. The length of the drive shaft is determined by the distance between the engine or power source and the driven components. It should be appropriately sized to avoid excessive vibrations or bending. Drive shafts are carefully balanced to minimize vibrations and rotational imbalances, which can affect the overall performance, comfort, and longevity of the drivetrain system.
7. Safety and Maintenance:
Drive shafts require proper safety measures and regular maintenance. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts, reducing the risk of injury. Safety shields or guards may also be installed around exposed drive shafts in machinery to protect operators from potential hazards. Regular maintenance includes inspecting the drive shaft for wear, damage, or misalignment, and ensuring proper lubrication of the U-joints. These measures help prevent failures, ensure optimal performance, and extend the service life of the drive shaft.
In summary, drive shafts play a vital role in transferring rotational power in various applications. Whether in vehicles or machinery, drive shafts enable efficient power transmission from the engine or power source to the wheels or driven components. They provide a flexible coupling, handle torque and speed transmission, accommodate angular movement, and contribute to the safety and maintenance of the system. By effectively transferring rotational power, drive shafts facilitate the functioning and performance of vehicles and machinery in numerous industries.
editor by CX 2024-02-21
in Varanasi India sales price shop near me near me shop factory supplier Ek15 Ef15 Ball Screw Support Unit for Precision Machinery manufacturer best Cost Custom Cheap wholesaler
Our items are used in a lot of fields. a specialized supplier of a total range of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers. Our product assortment also covers locking assemblies (clamping elements/locking gadget), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod finishes and yokes. EK15 EF15 Ball Screw Assistance Unit for EPT EPTTry
Product photographs
Technical specs
Applications
1. EPTT managing EPTT
two. Semi-conductor business
3. EPTT business EPTTry
four. Healthcare and nursing gear
5. EPT vitality gear
six. EPTT resource
7. EPT measuring instrument
8. EPT-pace rail and aviation transportation tools, and so forth.
EPTT profile
HangEPT EPTTyi Intelligent EPT EPTT, Ltd is a higher tech EPTTrprise, which focuses on EPTT tools style, deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment, production, product sales, and support. The business is headquartered in EPTT Island EPT EPT park in HangEPT town with 6000 sq. meters` XiHu (West EPT) Dis.Hu (West EPT) Dis.den-design modern day manufacturing facility, and primarily produces EPTT robots, linear electrical motors, linear modules, ball screws, linear XiHu (West EPT) Dis.Hu (West EPT) Dis. rails as leading goods, which are extensively employed in micro-precision products, laser processing tools, precision measuring instruments, Lcd panels tools, electronic semiconductor products, health-related gear and other locations that require for specific management and positioning.
Considering that establishment, EPTTyi had cooperated a EPTT-time period strategic partnership with a number of universities and analysis institutes. The R ampD group is composed of professors and engineers, and dedicated to providing consumers with exceptional one-cease answer. With the EPTd generation tools, top EPT, and EPT good quality services, our organization has already covered the EPTT region and overEPTT market. To EPT far more investment returns for customers, and by advantage of quotBecome the very best companion of EPTT, EPT a satisfied home for employees quot, EPTTyi strives to be an outstanding EPTT tools EPTTrprise.
Why US
middot ten-12 months supplier of one-quit linear movement program resolution.
middot Over twenty groups of popular merchandise.
middot EPT, skilled amp dependable to customers.
middot Minimaler MOQ with immediate factory value.
middot Limiteder delivery time.
middot EPTer right after-sale services policy.
Our provider
one. Assist customers to pick the right model, with CAD amp PDF drawing for your reference.
two. Quite specialist income crew to clean your get method.
three. Below guarantee, any quality problem verified of RYK solution, we will ship you a new one particular to change.
Bundle amp EPT
one. Plastic bag for each and every part, stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd exported carton outdoors for small buy.
two. EPTen case outside for large quantity or quite EPTT ball screw shaft or linear XiHu (West EPT) Dis.Hu (West EPT) Dis. rail.
three. Delivery time: five-12 daEPTTafter acquiring the payment
four. EPT: by convey (DHL, TNT, FedEx, etc.) or by sea
FAQ
Q: Are you a investing firm or producer?
A: We are the manufacturer with over 10 year`s encounter in this discipline.
Q: What`s the solution assortment?
A: Our major products incEPTT EPT module, EPTT robot, ball screw, linear XiHu (West EPT) Dis.Hu (West EPT) Dis., ball spline, support device, motor, and so on.
Q: What payment strategy do you accept?
A: T/T, L/C, and Western EPT are offered for us.
Q: What’s the shipping time?
A: It’s up to the orEPTTquantity and our production plan, generally 5-12 daEPTTafter the payment confirmed.
Q: Can you strictly follow the instructions of the tolerance and precision?
A: Yes, we strictly do the machining according to the consumer authorized drawing.
Q: What is actually your promise period?
A: We give eighteen months good quality ensure for the goods you purchased from us, besides for the synthetic damage.
in Bamako Mali sales price shop near me near me shop factory supplier Toco Standard Ball Screw Actuator manufacturer best Cost Custom Cheap wholesaler
We are seeking forward to creating effective organization interactions with new customers around the globe in the potential. We have exported our merchandise to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states, Canada, and so on. guarantees the security and consistency of the important purpose of elements. EPT StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd Ball Screw EPTT
| Manufacturer | EPT |
| Model | TGB,TGBS |
| HS CODE | 9001909090,957109090 |
| Objects EPTT | Plastic bag EPTTs Or EPTen EPTT |
| Payment terms | L/C,T/T,Paypal ,Western EPT |
| Generation guide time | 15 business daEPTTfor sample , 35 daEPTTfor the bulk |
| Samples | Sample cost assortment from $100to $500. sample categorical ask for pay by clients |
| Software | one. EPTT managing EPTT two. Semi-conductor sector 3. EPTT sector EPTTry 4. Health care equipment 5. EPT power gear 6. EPTT device 7. Parking system 8. EPT-pace rail and aviation transportation tools, etc. |
Specification For Solitary AXiHu (West EPT) Dis.s Robotic
An integrated system ,effortless set up and maintenance ,compact and lightweigEPTT ,substantial accuracy, higher stiffness.
This is high-precision linear module/ motorized linear XiHu (West EPT) Dis.Hu (West EPT) Dis.s .
Characteristics are as follows :
one. multi-tasking layout : Built-in EPT with ball screw and XiHu (West EPT) Dis.Hu (West EPT) Dis. rail U- references , in addition to supplying precision linear movement , but also with a adaptable accessory. The application of the EPTT multipurpose design and style is quite hassle-free , but also can attain large precision linear EPT demand .
two. Little and ligEPTT : U variety rail can be XiHu (West EPT) Dis.Hu (West EPT) Dis. rail and also can get the platform framework with substantially to diminished installation Volume, and the finite component technique to design and style the ideal structure , get the best stiffness to weigEPTT ratio. Lower torque and reduced inertia sleek positioning exercise, can reduce energy usage.
3.large-precision and substantial rigidity : according to the Deformation Examination of the make contact with placement of the ball by the load of all instructions, that this precision linear module with large precision and high rigidity qualities . The finite aspect method of best structural design, to get the very best stiffness to weigEPTT ratio.
four.simple to detection and outfitted : positioning precision , positioning repeatability , going for walks pXiHu (West EPT) Dis.Hu (West EPT) Dis.lel degree and starting up torque and other functions are straightforward to detected 5.effortless to faXiHu (West EPT) Dis.Hu (West EPT) Dis.tate assembly and servicing : can assemble total with no specialist competent assembly personnel, excellent lubrication to Dust-evidence, effortless maintenance
About Us
EPT EPTT EPTT,Ltd arefound in 2005,EPTTized in creating ball screw ,linear XiHu (West EPT) Dis.Hu (West EPT) Dis. ,linear ball bushing ,ball screw spline ,mono stage and other EPTT components .
Each process from turning to grinding and even retainer are reached by ourselves ,therefore guarantee every single of our solution a substantial efficiency and EPTT existence time and a clean and exact movement due to the minimum friction rolling.
We area huge EPTTance on our reputation – a status that appears to preceed us far more and more. This track record can only grow by way of great provider and top quality merchandise so we are dedicated to expXiHu (West EPT) Dis.Hu (West EPT) Dis. our range with practically nothing but the best goods and services and the in-home knowledge to back it all up. Of system, in-residence understanding is vitally EPTTant, not just to us, but you as a buyer – so we are proEPTTto host some of the ideal individuals in the market.
FAQ
1. Support :
a. Support client to choose correct design
b. Expert revenue team, make your acquire smooth.
2.payment :
Sample buy: We require 100% T/T in EPT. sample express want ask for spend by clientele
Bulk buy: 30% T/T in EPT, stability by T/T from duplicate of B/L.
T/T,Paypal, Western EPT is satisfactory.
three.Delievery :
sample: five-ten company daEPTTafter payment verified.
Bulk orEPTT:10-twenty workdaEPTTafter deposit EPTd .
four. Guarantee time
EPT provides 1 yr top quality assure for the products from your acquire day, other than the artificial damage.
5.Right after sale-service
For the duration of guarantee interval, any good quality problem of EPT product, as soon as verified, we will ship a new a single to substitute.
Make contact with Us