Product Description
Product Description
357129 Accessory Drive Shaft
| Engine Type | K19/K38/K50/QSK19/QSK38/QSM11/NT855 |
| Parts No. | 357129 |
| Part Name | Accessory Drive Shaft |
| Packing | Neutral Package or As Customized Requirement |
| Delivery Time | 3-7 Days |
| Condition | 100% New |
| MOQ | 1 Piece |
| Warranty | 6 Months |
| Shipment | By Express(DHL/Fedex/UPS),By sea,By air |
| Payment | T/T , D/P , Money Gram , L/C , Western Union |
Related Products
| Main Engine Model | ||||
| KTA19 | KTAA19 | KTTA19 | QSk19 | QSKTAA19 |
| NT855 | NTA855 | NTAA855 | KT38 | KTA38 |
| KT50 | KTA50 | KTTA50 | M11 | MTA11 |
| MTAA11 | 4BT | 6BT | 6CT | ISF |
| Products Include | ||
| Injector | Cylinder Head | Crankshaft |
| Camshafts | Valve Train Parts | Connecting Rod |
| Cylinder Liners | Piston | Piston Ring |
| Bearings and Bush | Fuel Pump | Oil Pump |
| Water Pump | Air Compressors | Turbocharger |
| Flywheels | Gasket | Bolts |
| Starter | Alternator | Vibration Dampers |
Packaging & Shipping
Company Profile
ZheJiang Jielot trading Co., Ltd. was established in March 2019, located in Xihu (West Lake) Dis., ZheJiang , China, close to ZheJiang CZPT Engine Factory-CCEC.
We can supply engines and generator sets for mining, Marine and land use. Various series of parts can also be provided.main product series:CCEC ,DCEC XCEC : QSB5.9, QSB6.7, KTA19, KTA38, KTA50, NTA855, M11, QSM11, ISM11, QSX15, QSL9, 6BT5.9, 6CT8.3 ,4BT , Fleetguard filter ,HOLSET turbocharger,Air compressor and so on.
We have a strategic cooperative relationship with the largest CZPT distributor in China, and we have a coexisting relationship with the largest OEM factory. We can provide genuine Cummins parts or high-quality parts,Aftermarket quality parts, giving you a dual choice, so that you can choose more suitable for your price and quality.
We have cooperated with Thailand, Singapore, Malaysia, Indonesia, Dubai, Russia, Morocco, Germany and many other countries, and our products have been unanimously recognized. we have a complete set of procedures, in the quotation, procurement, delivery, transportation of mature solutions, to solve your worries.
Certifications
Exhibition & Customer
Our Advantages
1. We have more than 3 years of experience in CZPT diesel engine parts.
2. We cooperate with many certificated OEM factories of CZPT who have advanced equipment and technology.
3. High Quality + Reasonable Price + Quick Response + Technical Support is what we are trying to offer you the best cooperation experience.
FAQ
Q1:What is your terms of payment?
A1:T/T 30% as deposit,and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q2:How about your delivery time?
A2:Generally, it will take 7 days for air order and 20 to 30 days for sea order after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q3:Do you have MOQ?
A3:For general parts,we don’t have MOQ,1 piece can be sold,but for some parts like bearing,piston we may have MOQ like 6pcs,12pcs,but we will inform if there is any MOQ for special parts.
Q4:How to contact you?
A4:You can send inquiry to us directly or you can contact us by email phone call,WhatsApp,WeChat,Facebook and Skype. We will try to reply you as soon as possible.
Q5:How long is the production cycle (lead time) ?
A5:For engine parts, we usually have enough stock; For engines, usually around 10-20 days; For stock engine, usually 1 week.
Q6:How do you make our business long-term and keep good relationship?
A6:1. We keep good quality and competitive price to ensure our customers benefit.
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO9001, CE |
|---|---|
| Standard Component: | Standard Component |
| Technics: | Press |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do drive shafts ensure efficient power transfer while maintaining balance?
Drive shafts employ various mechanisms to ensure efficient power transfer while maintaining balance. Efficient power transfer refers to the ability of the drive shaft to transmit rotational power from the source (such as an engine) to the driven components (such as wheels or machinery) with minimal energy loss. Balancing, on the other hand, involves minimizing vibrations and eliminating any uneven distribution of mass that can cause disturbances during operation. Here’s an explanation of how drive shafts achieve both efficient power transfer and balance:
1. Material Selection:
The material selection for drive shafts is crucial for maintaining balance and ensuring efficient power transfer. Drive shafts are commonly made from materials such as steel or aluminum alloys, chosen for their strength, stiffness, and durability. These materials have excellent dimensional stability and can withstand the torque loads encountered during operation. By using high-quality materials, drive shafts can minimize deformation, flexing, and imbalances that could compromise power transmission and generate vibrations.
2. Design Considerations:
The design of the drive shaft plays a significant role in both power transfer efficiency and balance. Drive shafts are engineered to have appropriate dimensions, including diameter and wall thickness, to handle the anticipated torque loads without excessive deflection or vibration. The design also considers factors such as the length of the drive shaft, the number and type of joints (such as universal joints or constant velocity joints), and the use of balancing weights. By carefully designing the drive shaft, manufacturers can achieve optimal power transfer efficiency while minimizing the potential for imbalance-induced vibrations.
3. Balancing Techniques:
Balance is crucial for drive shafts as any imbalance can cause vibrations, noise, and accelerated wear. To maintain balance, drive shafts undergo various balancing techniques during the manufacturing process. Static and dynamic balancing methods are employed to ensure that the mass distribution along the drive shaft is uniform. Static balancing involves adding counterweights at specific locations to offset any weight imbalances. Dynamic balancing is performed by spinning the drive shaft at high speeds and measuring any vibrations. If imbalances are detected, additional adjustments are made to achieve a balanced state. These balancing techniques help minimize vibrations and ensure smooth operation of the drive shaft.
4. Universal Joints and Constant Velocity Joints:
Drive shafts often incorporate universal joints (U-joints) or constant velocity (CV) joints to accommodate misalignment and maintain balance during operation. U-joints are flexible joints that allow for angular movement between shafts. They are typically used in applications where the drive shaft operates at varying angles. CV joints, on the other hand, are designed to maintain a constant velocity of rotation and are commonly used in front-wheel-drive vehicles. By incorporating these joints, drive shafts can compensate for misalignment, reduce stress on the shaft, and minimize vibrations that can negatively impact power transfer efficiency and balance.
5. Maintenance and Inspection:
Regular maintenance and inspection of drive shafts are essential for ensuring efficient power transfer and balance. Periodic checks for wear, damage, or misalignment can help identify any issues that may affect the drive shaft’s performance. Lubrication of the joints and proper tightening of fasteners are also critical for maintaining optimal operation. By adhering to recommended maintenance procedures, any imbalances or inefficiencies can be addressed promptly, ensuring continued efficient power transfer and balance.
In summary, drive shafts ensure efficient power transfer while maintaining balance through careful material selection, thoughtful design considerations, balancing techniques, and the incorporation of flexible joints. By optimizing these factors, drive shafts can transmit rotational power smoothly and reliably, minimizing energy losses and vibrations that can impact performance and longevity.
How do drive shafts enhance the performance of automobiles and trucks?
Drive shafts play a significant role in enhancing the performance of automobiles and trucks. They contribute to various aspects of vehicle performance, including power delivery, traction, handling, and overall efficiency. Here’s a detailed explanation of how drive shafts enhance the performance of automobiles and trucks:
1. Power Delivery: Drive shafts are responsible for transmitting power from the engine to the wheels, enabling the vehicle to move forward. By efficiently transferring power without significant losses, drive shafts ensure that the engine’s power is effectively utilized, resulting in improved acceleration and overall performance. Well-designed drive shafts with minimal power loss contribute to the vehicle’s ability to deliver power to the wheels efficiently.
2. Torque Transfer: Drive shafts facilitate the transfer of torque from the engine to the wheels. Torque is the rotational force that drives the vehicle forward. High-quality drive shafts with proper torque conversion capabilities ensure that the torque generated by the engine is effectively transmitted to the wheels. This enhances the vehicle’s ability to accelerate quickly, tow heavy loads, and climb steep gradients, thereby improving overall performance.
3. Traction and Stability: Drive shafts contribute to the traction and stability of automobiles and trucks. They transmit power to the wheels, allowing them to exert force on the road surface. This enables the vehicle to maintain traction, especially during acceleration or when driving on slippery or uneven terrain. The efficient power delivery through the drive shafts enhances the vehicle’s stability by ensuring balanced power distribution to all wheels, improving control and handling.
4. Handling and Maneuverability: Drive shafts have an impact on the handling and maneuverability of vehicles. They help establish a direct connection between the engine and the wheels, allowing for precise control and responsive handling. Well-designed drive shafts with minimal play or backlash contribute to a more direct and immediate response to driver inputs, enhancing the vehicle’s agility and maneuverability.
5. Weight Reduction: Drive shafts can contribute to weight reduction in automobiles and trucks. Lightweight drive shafts made from materials such as aluminum or carbon fiber-reinforced composites reduce the overall weight of the vehicle. The reduced weight improves the power-to-weight ratio, resulting in better acceleration, handling, and fuel efficiency. Additionally, lightweight drive shafts reduce the rotational mass, allowing the engine to rev up more quickly, further enhancing performance.
6. Mechanical Efficiency: Efficient drive shafts minimize energy losses during power transmission. By incorporating features such as high-quality bearings, low-friction seals, and optimized lubrication, drive shafts reduce friction and minimize power losses due to internal resistance. This enhances the mechanical efficiency of the drivetrain system, allowing more power to reach the wheels and improving overall vehicle performance.
7. Performance Upgrades: Drive shaft upgrades can be popular performance enhancements for enthusiasts. Upgraded drive shafts, such as those made from stronger materials or with enhanced torque capacity, can handle higher power outputs from modified engines. These upgrades allow for increased performance, such as improved acceleration, higher top speeds, and better overall driving dynamics.
8. Compatibility with Performance Modifications: Performance modifications, such as engine upgrades, increased power output, or changes to the drivetrain system, often require compatible drive shafts. Drive shafts designed to handle higher torque loads or adapt to modified drivetrain configurations ensure optimal performance and reliability. They enable the vehicle to effectively harness the increased power and torque, resulting in improved performance and responsiveness.
9. Durability and Reliability: Robust and well-maintained drive shafts contribute to the durability and reliability of automobiles and trucks. They are designed to withstand the stresses and loads associated with power transmission. High-quality materials, appropriate balancing, and regular maintenance help ensure that drive shafts operate smoothly, minimizing the risk of failures or performance issues. Reliable drive shafts enhance the overall performance by providing consistent power delivery and minimizing downtime.
10. Compatibility with Advanced Technologies: Drive shafts are evolving in tandem with advancements in vehicle technologies. They are increasingly being integrated with advanced systems such as hybrid powertrains, electric motors, and regenerative braking. Drive shafts designed to work seamlessly with these technologies maximize their efficiency and performance benefits, contributing to improved overall vehicle performance.
In summary, drive shafts enhance the performance of automobiles and trucks by optimizing power delivery, facilitating torque transfer, improving traction and stability, enhancing handling and maneuverability, reducing weight, increasing mechanical efficiency, enabling compatibility with performance upgrades and advanced technologies, and ensuring durability and reliability. They play a crucial role in ensuring efficient power transmission, responsive acceleration, precise handling, and overall improved performance of vehicles.
How do drive shafts contribute to transferring rotational power in various applications?
Drive shafts play a crucial role in transferring rotational power from the engine or power source to the wheels or driven components in various applications. Whether it’s in vehicles or machinery, drive shafts enable efficient power transmission and facilitate the functioning of different systems. Here’s a detailed explanation of how drive shafts contribute to transferring rotational power:
1. Vehicle Applications:
In vehicles, drive shafts are responsible for transmitting rotational power from the engine to the wheels, enabling the vehicle to move. The drive shaft connects the gearbox or transmission output shaft to the differential, which further distributes the power to the wheels. As the engine generates torque, it is transferred through the drive shaft to the wheels, propelling the vehicle forward. This power transfer allows the vehicle to accelerate, maintain speed, and overcome resistance, such as friction and inclines.
2. Machinery Applications:
In machinery, drive shafts are utilized to transfer rotational power from the engine or motor to various driven components. For example, in industrial machinery, drive shafts may be used to transmit power to pumps, generators, conveyors, or other mechanical systems. In agricultural machinery, drive shafts are commonly employed to connect the power source to equipment such as harvesters, balers, or irrigation systems. Drive shafts enable these machines to perform their intended functions by delivering rotational power to the necessary components.
3. Power Transmission:
Drive shafts are designed to transmit rotational power efficiently and reliably. They are capable of transferring substantial amounts of torque from the engine to the wheels or driven components. The torque generated by the engine is transmitted through the drive shaft without significant power losses. By maintaining a rigid connection between the engine and the driven components, drive shafts ensure that the power produced by the engine is effectively utilized in performing useful work.
4. Flexible Coupling:
One of the key functions of drive shafts is to provide a flexible coupling between the engine/transmission and the wheels or driven components. This flexibility allows the drive shaft to accommodate angular movement and compensate for misalignment between the engine and the driven system. In vehicles, as the suspension system moves or the wheels encounter uneven terrain, the drive shaft adjusts its length and angle to maintain a constant power transfer. This flexibility helps prevent excessive stress on the drivetrain components and ensures smooth power transmission.
5. Torque and Speed Transmission:
Drive shafts are responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). Drive shafts must be capable of handling the torque requirements of the application without excessive twisting or bending. Additionally, they need to maintain the desired rotational speed to ensure the proper functioning of the driven components. Proper design, material selection, and balancing of the drive shafts contribute to efficient torque and speed transmission.
6. Length and Balance:
The length and balance of drive shafts are critical factors in their performance. The length of the drive shaft is determined by the distance between the engine or power source and the driven components. It should be appropriately sized to avoid excessive vibrations or bending. Drive shafts are carefully balanced to minimize vibrations and rotational imbalances, which can affect the overall performance, comfort, and longevity of the drivetrain system.
7. Safety and Maintenance:
Drive shafts require proper safety measures and regular maintenance. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts, reducing the risk of injury. Safety shields or guards may also be installed around exposed drive shafts in machinery to protect operators from potential hazards. Regular maintenance includes inspecting the drive shaft for wear, damage, or misalignment, and ensuring proper lubrication of the U-joints. These measures help prevent failures, ensure optimal performance, and extend the service life of the drive shaft.
In summary, drive shafts play a vital role in transferring rotational power in various applications. Whether in vehicles or machinery, drive shafts enable efficient power transmission from the engine or power source to the wheels or driven components. They provide a flexible coupling, handle torque and speed transmission, accommodate angular movement, and contribute to the safety and maintenance of the system. By effectively transferring rotational power, drive shafts facilitate the functioning and performance of vehicles and machinery in numerous industries.
editor by CX 2024-01-29
China factory CZPT CZPT CZPT Chntc CZPT Original Engine Spare Parts Through Shaft with Az9231320261 drive shaft carrier bearing
Product Description
Product Description
Detailed Photos
Product Parameters
| Product name | Shacman CZPT CZPT CHNTC CZPT Original engine Spare parts Through shaft with AZ9231320261 |
| Truck Model | Sinotruck CZPT CHNTC Howo |
| Part No.: | AZ9231320261 |
| Place: | ZheJiang , China |
| Warranty: | 6 month |
| Model Number: | Truck Parts |
| Specification: | Standard |
| Delivery | Within 10 days |
Certifications
Packaging & Shipping
Company Profile
FAQ
FAQ
1. who are we?
We are based in ZheJiang , China, start from 2018,sell to Africa(70.00%),Domestic Market(10.00%),Southeast Asia(10.00%),Mid East(10.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
used heavy truck,new heavy truck,heavy truck parts,engineering machinery accessories,howo truck
4. why should you buy from us not from other suppliers?
Relying on heavy truck parts mall,has strong funds and competitive price. Establish Nigerian branch company and warehouses.Its the only professional auto parts mall +overseas warehouse platform in China providing one-stop service for industrial products.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Arabic,Russian
| Type: | Chassis |
|---|---|
| Certification: | ISO9001 |
| Driving System Parts: | Engine System |
| Electrical System Parts: | Engine System |
| Brake System Parts: | Engine System |
| Transmission System Parts: | Engine System |
How to Identify a Faulty Drive Shaft
The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
Symptoms of Driveshaft Failure
If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.
Drive shaft assembly
When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
U-joint
Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.
tube yoke
QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
end yoke
The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.
bushing
The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.
editor by CX 2023-07-13
China Customized High Precision CNC Machining Eccentric Shaft Long Big Rotor Shaft for Marine Engine drive shaft electric motor
Product Description
About Us
fifteen+ many years encounter of integral machining options, all selection of equipment.
Specialize in the machining of large, precision, complex formed Component and all sorts of metal,these kinds of as metal,stainless metal,alloy aluminium and so forth.
on-time delivey, worldwide providers, tolerance .001mm, size up to 17 meter.
If you can attract it,we can machine it! expense-effectively and on-time transport.
Merchandise Assortment
custom made machining
massive machining
5 axis machining
CNC elements machining
Stamping components
|
US $1-1.5 / Piece | |
1 Piece (Min. Order) |
###
| Material: | Alloy Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
###
| Customization: |
Available
|
|---|
|
US $1-1.5 / Piece | |
1 Piece (Min. Order) |
###
| Material: | Alloy Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
###
| Customization: |
Available
|
|---|
What is a driveshaft and how much does it cost to replace one?
Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.
Repair damaged driveshafts
A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that one of the two drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
Learn about U-joints
While most vehicles have at least one type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are two main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.
Symptoms of Driveshaft Failure
One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
The cost of replacing the drive shaft
Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have two separate driveshafts. One goes to the front and the other goes to the back. If your car has four wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong one can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.
editor by czh 2022-12-24
China Engine Parts Transmission Shaft Drive Axle for 190 Series Gas Generator Drilling Engine Marine Engine with Quality Management Systems Certificate 12V. 48.02 drive shaft yoke
Product Description
Engine Components Transmission Shaft Travel Axle for 190 Sequence Gasoline Generator Drilling Motor Maritime Motor.
| HangZhou CZPT Green Electricity Tools Co,ltd |
| CHIXIHU (WEST LAKE) DIS./SHENGXIHU (WEST LAKE) DIS. 6L190,8V190,12V190,16V190 DIESEL/Gasoline Motor Components |
Handle Panel
The control panel of the diesel generating set is mostly utilised to handle the power transmission of generator sets, offering protections for deficiency-voltage, in excess of-recent, computerized velocity regulation and reverse energy. In the meantime, it also can keep track of these kinds of parameters as revs, drinking water temperature, oil temperature, oil strain and exhaust temperature, with a sound-light alarming output program.
|
US $0.5-3.5 / Piece | |
10 Pieces (Min. Order) |
###
| Certification: | ISO9001, CE |
|---|---|
| Standard Component: | Standard Component |
| Technics: | Casting |
| Material: | Iron |
| Type: | Shaft |
| Transport Package: | Carton or Wooden Case |
###
| Customization: |
Available
|
|---|
###
| Jinan Guohua Green Power Equipment Co,ltd |
| CHIDONG/SHENGDONG 6L190,8V190,12V190,16V190 DIESEL/GAS ENGINE PARTS |
|
US $0.5-3.5 / Piece | |
10 Pieces (Min. Order) |
###
| Certification: | ISO9001, CE |
|---|---|
| Standard Component: | Standard Component |
| Technics: | Casting |
| Material: | Iron |
| Type: | Shaft |
| Transport Package: | Carton or Wooden Case |
###
| Customization: |
Available
|
|---|
###
| Jinan Guohua Green Power Equipment Co,ltd |
| CHIDONG/SHENGDONG 6L190,8V190,12V190,16V190 DIESEL/GAS ENGINE PARTS |
What is a drive shaft?
If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from one side. If it only happens on one side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.
The drive shaft is a mechanical part
A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the two parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.
It transfers power from the engine to the wheels
A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.
It has a rubber boot that protects it from dust and moisture
To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.
it has a U-shaped connector
The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the two components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.
it has a slide-in tube
The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the two components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.
It uses a bearing press to replace worn or damaged U-joints
A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If one of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.
editor by czh 2022-12-03
in West Rand South Africa sales price shop near me near me shop factory supplier W51.5 L=870 Cross Joint Shaft for Oil Engine Used in Oil Drilling Rig Machinery manufacturer best Cost Custom Cheap wholesaler
EPG has been efficiently licensed by ISO9002 Quality Administration Method, ISO9001 Top quality Management Program, API certification, ISO/TS16949:2002 and ISO10012 measurement management method. specialize in energy transmission merchandise, CATV products, mechanical seal, hydraulic and Pheumatic, and marketing merchandise. In 2000, EPG took the direct in getting ISO14001 surroundings administration certificate and thereafter passed the inspection of clean production and recycling economic climate, successful the title of “Zhejiang Inexperienced Enterprise”.
W51.five L=870 Cross EPTt Shaft For oil engine utilized in oil drilling rig EPTTry
Item Description
| framework | Kind A | FleXiHu (West EPT) Dis.ble or Rigid | Rigid | StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd or NonstXiHu (West EPT) Dis.Hu (West EPT) Dis.rd | NonstXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
| EPT | Alloy metal | Brand name | HangEPT XiHu (West EPT) Dis.HU (WEST LAKE) DIS. | Place of origin | EPTTngsu,EPTT |
| Design | W51.5 L=870 | Uncooked components | heat treatment | Duration | 870mm |
| Flange DIA | 225mm | Nominal torque | count on design | coating | large responsibility EPTT paint |
| Paint clour | customization | Software | Oil drilling rig products | OEM/ODM | Available |
| Certification | ISO,TUV,SGS | Price tag | estimate according to design | Custom support | Available |
EPTT amp Supply
EPTT particulars:StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd plywood scenario
Shipping and delivery depth: fifteen -20 functioning times,count on the genuine produce situation
FAQ
Q: Are you investing business or manufacturer ?
A: We are a professional producer EPTTizing in manufacturing cardan shafts. We provide cardan shafts for the EPTTsalers , sellers and stop-users from diverse nations.
Q: Can you do OEM? And what is your min get ?
A: Yes, totally. EPTTly, min buy is1 set. Most of our merchandise are EPTT. Every single buy from our factory, we constantly generate cardan shaft right after customer confirmed the drawing. So we didn’t have inventory.
Q: How does your factory do reXiHu (West EPT) Dis.Hu (West EPT) Dis.ding high quality control?
A:EPTT is priority! We constantly connect great EPTTance to high quality managing from the extremely commencing to the finish:
1) To begin with, we have QC office to handle the good quality
two) Next, we have all thorough information for nonconformity goods, then we will make summary according to these information, keep away from it take place once again.
three) Thirdly,In orEPTTto meet up with planet-course good quality stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds stringent demands, we passed the SGS, TEPTTproduct certification.
4)Fourthly,Have initial-class creation tools, incXiHu (West EPT) Dis.Hu (West EPT) Dis. CNC EPTTs and machining cEPTTr.
Best near me made in China – replacement parts – PTO shaft manufacturer & factory FAW pto on tractors Truck Parts Clutch Plate 430 for Weichai Xichai Engine with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 various branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Our subaru outback drive shaft items pto coupler elements is chelsea pto equipment lash popular ford fiesta generate shaft price exported jeep wrangler rear travel shaft to carrier bearing for pto shaft the pto shafts australia United dodge dakota rear push shaft States, discovery 2 drive shaft Germany, sequence 4 pto shaft rating Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Center and South The us, Thailand, Pakistan, Indonesia, more than sixty international locations and locations.Our firm is situated in XiHu HangZhou Zhejiang Province. T
Best Custom made in China – replacement parts – PTO shaft manufacturer & factory Sinotruk toyota yaris drive shaft HOWO Cylinder Liner Piston 93mm for Wd615 Engine with ce certificate top quality low price
We – EPG Team the most significant agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
bush hog 2615 pto shaft “EPG” pto adapter shaft brand name how to mend pto shaft rotocultivator walterscheid pto shaft elements ploughshares pto shaft cover tractor supply in john deere 3025e pto shaft dimensions T.S. how to take away pto shaft from john deere tractor overall 2006 f250 generate shaft strains pto shaft slip clutch created 52853500ab in our manufacturing unit have been tested and appraised by the Ministry of Agriculture and have acquired the license of popularizing farm equipment promulgated by the Ministry of Agriculture of the People’s Republic of China. Our factory has attained the certification of China’s Farm Machinery Merchandise Top quality Authentication promulgated by the Farm Equipment Items Top quality Authentication Centre of China. HangZhou E EPT Entire world EPT TRADE CO.LTD
EPT howo cylinder liner piston 93mm for wd615 engine
specs:
| parts title | cylinder liner |
| parts no. | vg150571344 |
| size | 135mm*30mm*30mm |
| brand name | SINOTRUK |
| original | China |
1. Vehicles: SINOTRUK, SHCMAN, XIHU (WEST LAKE) DIS.FENG , FAW , YUXIHU (WEST LAKE) DIS.
2. posion: engine
three. supplies: alloy
4. electrical power: 21w, 5w, 3w, 2w
five. presuress: 12v
six. authentic: china
seven. high quality: first one
eight. payment: T/T
Other merchandise:
| WG9716720001 | HEAD Gentle Left |
| WG9716720002 | HEAD Light Proper |
| WG9719720571 | FOG LAMP Left |
| WG9719720026 | FOG LAMP Appropriate |
| GRILL | |
| WG1642242101 | BUMPER |
| GRILL LOCK | |
| WG1642770001 | REAR See MIRROR LHS (lobed |
| WG1642770003 | REAR See MIRROR RHS (lobed |
| WG1642110016 | HINGE Cover |
| WG1642341001 | Door LOCK SERIA |
| WG1642235715 | FENDER L |
| WG1642235716 | FENDER R |
| WG1642242103 | FOOT Action L |
| WG1642242104 | FOOT Step R |
| FENDER EXTENSION | |
| VG260571253 | Motor BELT 1050 |
| VG1500090066 | DINAMO BELT 783 |
| WG1500130017 | AC BELT 1571 |
| AZ9112340123 | WHEEL BOLT REAR |
| WG1642440088 | SHOCK ABSORBER |
| WG1642435713 | SHOCK ABSORBER |
| AZ1642440571 | SHOCK ABSORBER |
| WG971918571 | EXHAUST BRAKE VALVE |
| WG9725542041 | EXHAUST BRAKE VALVE ASSY |
| WG9719820001 | HYDROLIC CYLINDER |
| WG9725570001 | ACCELERATOR CABLE |
| WG910571014 | ACHRATOR PISTON |
| CORNER Dealing with Correct | |
| CORNER Dealing with Left | |
| WG1642110019 | POLGARNISH L |
| WG164211571 | POLGARNISH R |
| WG9725195712 | AIR CLEANER |
| WG1642770099 | DOWN Check out MIRROR |
| WG1642770004 | Side Check out MIRROR |
| WG1642875711 | Sunlight VISOR ORIGNAL |
| VG1092080017 | Fuel HOSE Big |
| VG1092080018 | Gas HOSE Modest |
| VG1092080019 | Fuel HOSE MEDIUM |
| VG1560090007 | STARTER MOTOR |
| VG1500060051 | H2o PUMP |
| VG2600060446 | Admirer |
| WG9725535717 | Enthusiast SHROUD |
| WINDOW LIFTER Switch | |
| AZ1642330060 | Doorway GLASS Fastened L. |
| AZ1642330061 | Doorway GLASS Mounted R. |
| WG1642350004 | Door GLASS MOVEABLE L |
| WG1642350003 | Doorway GLASS MOVEABLE R |
| a hundred ninety*220*thirty | HUB SEAL 190 220 30 |
| WG9725190155 | OIL Bath NEW Design |
| WG91923571 | Master CYLINDER |
| Adaptable 0168 | |
| 190003326531 | BEARING 32310 |
| 190003326543 | BEARING 32314 |
| 33213 | BEARING 33213 |
| 33118 | BEARING 33118 |
| MOTOR SERIA GASKET | |
| VG156008219 | LAMETA |
| TURBO CHARGER | |
| AZ9725525716 | RUBBER BEARER Aged 6 KEDADA |
| AZ1642430263 | SINO NYLON BUSH |
| 329910 | ROLLER BEARING |
| 32310 | ROLLER BEARING |
| WG225710005 | SINO CLUTCH HUB |
| AZ9738410041 | SINO TER ROD ARM L |
| WG1560090007 | STARTER MOTOR |
| WG9725525717 | SPRING Assist Correct |
| WG9725525719 | SPRING Assist Correct |
| 99012340123 | REAR WHEEL BOLT WITH NUT |
| WG9725230042 | Functioning CYLINDER |
| X170S | SINO PLUGER X170S |
| AZ92311325711 | DIFF.ASSY |
| WG9725530604 | SINO SHRAWED |
| WG9000360521 | AIR DEYER FILTER |
| AZ9100765712 | BATTERY Include |
| WG9719535711 | RADIATOR |
| WG9114160011 | PLATER |
| AZ9231342006 | BRAKE DRUM |
| AZ9112440001 | Front BRAKE DRUM |
| WG1642740011 | BRUSH BLADER |
| WG1642777571 | REAR View MIORR |
| WG1652777571 | REAR Look at MIORR |
| VG1560118229 | TURBO CHARGER |
| VG1560057111 | PISTON |
| VG15600030040 | PISTON RING |
| VG1500060051 | H2o PUMP |
| WG9727540001 | MUFFLER |
| WG1642770001 | REAE View MIRROR Left |
| WG1642770003 | REAE View MIRROR Correct |
| WG1642350001 | RUBBER SEAL Facet |
| AZ9725529272 | V-PROPELLER |
| WG972555710 | ACCELERATOR CABLE |
| WG9725570001 | ACCELERATOR CABLE |
| AZ1642439335 | SINO BREAKET |
| AZ1642439336 | SINO BREAKET |
warehouse and samples
Rich Stock
EPT quality control
Our solutions:
one. Reply your enquiry in 24 hrs.
2. OEM, customer design,purchaser label companies supplied.
three. Our merchandise line including vehicles and machinery spare areas: EPT HOWO,XIHU (WEST LAKE) DIS.N GENLYON, SHACMAN,YUXIHU (WEST LAKE) DIS. JAC AND SHXIHU (WEST LAKE) DIS.I,LIUGONG,XCMG,XGMA ,and many others.
four. Distinctive and unique answer can be offer to our customer by our well-educated and skilled engineers and staffs.
five, .Supply time: little get can be send in three functioning times following received payment. Total container orders can be ship in fifteen-twenty functioning days.
- Shipping and delivery approaches: by sea, by air, by teach and by express, depands on your buy quantity.
seven, we can provide complete line truck spare areas for buyers: engine parts , chassis elements, entire body components, clutch parts, brake components, gearbox elements, axle parts.
eight.we can organize supply by means of sea , or air or specific. Depands on order amount and your requirement!
nine. payment way: T/T, L/C, D/P, Western Union, moneygram
10. LOADING Ports: Any port in china.
11. First: HangZhou ,China.
Our organization informations
HangZhou E EPT Planet EPT Trade Co.,Ltd is a professional truck spare areas and EPT machine parts provider in China. All staffs have in excess of 10-several years knowledge on truck elements business and cooperation with oversea organizations several years make us expert in EPT trade also.
At present, we can give large good quality spare parts for HOWO(SINOTRUK), XIHU (WEST LAKE) DIS.N(GENLYON), SHACMAN, FOTON(AUMAN),YUXIHU (WEST LAKE) DIS., FAW(jiefang) ,JAC, SHXIHU (WEST LAKE) DIS.I, XCMG, XGMA, LIUGONG,LINGONG And so on.
Goods traces which includes: clutch clutch plate , clutch disc, clutch strain plate, alternators, starters, turbochargers, piston , piston kits, piston ring,gaskets kits, cylinder liner,h2o pump, flywheel, filters , oil filters , gasoline filters, air filter, air cleaner, cylinder head , cylinder block, cylinder gaskets, principal bearing, cod-rod bearing, link rod entrance spring, rear spring assy, front go over, front bumper, breaket, bracket, spring, gasoline tank, variation assy, pto- pump, brake drum, bearing, shock absorber, piston(G1),pistion, hollow shaft, thrust rod, exhaust pipe,exhaust shaft,vent-pipe, support, alternater belt, supporter belt, air-problem belt, rubber seat, bush, nylon bush, bolt, wheel bolt, rear wheel bolts, starter key, split EPT ,split liner, head lamp , front lamp. Mild lamp, fog lamp, rear mirror, A pole, fenders , foodstuff steps, bumper, door assy, seats, driver seat, sunlight visor, mud guard, gears, mixture lamp, mastercylinder, brake EPT non asbseto, cylinder head , engine, cabin, vehicles, rear see mirror, enjection pump, rubber hose, double h valve, howo cabin , mixture change, compressor, tie rod. Ball joint. Whee EPT , rim, shock absorber, clutch plate,alloy wheels, steering, clutch kits.bearings
FAQ
Q1. What is your terms of packing?
A: Usually, we pack our products in neutral boxes and manufacturing unit cartons. If you have lawfully registered packages
we can pack the items in your branded containers following obtained your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% prior to shipping. We will show you the photographs of the products and packages
prior to you pay out the balance.
Q3. What is the terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
This autumn. How about your shipping and delivery time?
A: Normally, it will take 7- 20 doing work days right after getting your EPT payment. The particular delivery time depends
on the objects and the amount of your buy.
Q5. Can you produce in accordance to the samples?
A: Yes, we can create by your samples or technical drawings. We can construct the molds and fixtures.
Q6. how to handle the goods top quality?
A: 1. we have a professional good quality management crew , who have functioning on truck elements market for numerous a long time and have rich encounter on examining. every single components ahead of shipping and delivery will be examining .
2. we have EPT factories cooperation.
Welcome you deliver inquiry and EPT there will be have long time cooperations!
Best near me made in China – replacement parts – PTO shaft manufacturer & factory Ce pto shaft couplings Approved Flat Die Biomass Wood Pellet Mill with Diesel Engine with ce certificate top quality low price
We – EPG Group the largest agricultural gearbox and pto factory in China with 5 various branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
pto yoke proportions EPG grease pto shaft Machinery king kutter pto yoke is appropriate travel shaft located bmw 1 series push shaft alternative in pto shaft classes XiHu 540 pto shaft Spot pto shaft guards HangZhou 2006 subaru outback drive shaft Zhejiang pto travel shaft for tractor ,China. It is 30km from our manufacturing facility to HangZhou international airport. Our merchandise is well-known exported to the United States, Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Center and South The usa, Thailand, Pakistan, Indonesia, much more than 60 nations around the world and regions. China Provide 15HP / 22HP / 32HP EPT Motor Wooden Pellet Device
Solution Introduction:
one. Our EPT pellet creating machine can produce biomass wooden pellet. It may also be relevant to biological fertilizer for reduced-temperature granulation. Suitable for huge farms and natural and organic natural drugs and chemical industry, and so on.
two. Raw materials of EPT motor wooden pellet equipment: wood sawdust, rice husk, straw, bamboo power, cotton stalk, cottonseed skins, weeds, crop stalks and other pl EPT wastes, especially low-bonding and unformed materials.
three. Dampness of raw materia EPT should be 10-fifteen%. If not, the raw material must be dried.
Technical Information:
| Design | Capacity | Power | Pellet Size | Gasoline consumption | Packing Dimension | Bodyweight |
| 200D | 100-120kg/h | fifteen HP | 6,8mm | 2 L/H | 1250*650*1200 mm | 450kg |
| 250D | one hundred fifty-200 | 22 HP | 3 L/H | 1300*seven hundred*1300 mm | 650kg | |
| 300D | 250-350 | 32 HP | 6,8,10mm | four L/H | 1650*750*1400 mm | 800kg |
| 350D | 300-five hundred | 42 HP | six L/H | 800*700*1200 mm 1350*1100*1100 mm |
950kg |
Features
- Adopt high precision gear drive. Output is 20% larger than that of belt drive.
- Advanced bearing and oil seal guarantee an efficient and stable working process.
- Feeding device adopts frequency conversion motor, ensuring continuous and even feeding.
- Different size of diameter for pellet gap makes various sizes of pellets possible.
- Flexible coupling shaft with novel structure ensures a stable pelletizing process and low break-down possibility.
- Permanent magnet device can remove impurities in the pelletizing process.
Working Principle:
After grinding and drying process, the materials will be sent into feeding device and mixed in the conditione,Then they are forced into the pelletizing chamber by the imperative feeder. In the chamber, materia EPT will be squeezed between the rollers and die to be foremed into cylinder shape pellets. and then the cutting
knives will cut the pellets into specified size while the pellets are extruded.
Relevant scope
This equipment are powered by EPT motor. It is largely used to compress crushed sawdust, straw ,hay, soya, corn, stalk ,bamboo powder, rice husk, seed skin, peanuts shell clover, cotton seed Husk cotton/corn/sunflower stalk.and so on all sorts of powder materia EPT into cylindrical form particles(pellet) for the fuel.
Last Wood Pellets:
Best factory made in China – replacement parts – PTO shaft manufacturer & factory 9HP john deere 4640 pto shaft size 13HP Gasoline Engine Pto Shaft 25mm Gx270 Gx390 177f Engine with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto factory in China with 5 distinct branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
two piece driveshaft Our 2004 ford f150 4×4 rear drive shaft organization broad angle pto shaft value has ebay pto drive shaft sound mahindra tractor pto shaft cost financial tractor provide tractor pto shaft strength, dana spicer driveshaft builds tractor pto restore up pto yoke assembly a pto shaft assistance bearing technician team contingent with substantial high quality, possesses the creation assembly line of technicalization in China and excellent method checking on solution quality and runs advertising and marketing networks all through the place. Adhering to “Survival by High quality, Improvement by Technology & Credit score”, The company will continually boost item functionality to satisfy the growing buyer demands in the arduous design of operate.
five.5HP-13HP Honda Gasoline Motor Petrol Engine
1. With Strict Tests from Spare Parts to complete Device, EPT have outstanding toughness with substantial
Performance-cost ratio, it is variety a single Silent engin.
two. Large gasoline tank capacity, four hrs of ongoing operation
three. Higher good quality electricity output
four. Experienced mechanical seal system
five. Compact in construction and handy for carry
six. Easy starting up by recoil or E-commence(important with battery)
7. EPT balancer shaft within decreases the vibration to the minimum degree
Specialized info
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
one.Q:What merchandise are you manufacturing unit production?
A:We manufacture Turbines, H2o Pumps & Engines.
two.Q:Where is your manufacturing unit found? How can I visit there?
A: Our manufacturing facility is found in HangZhou Town, ZHangZhoug Province, China, about 2 hours teach from ZheJiang . All our customers, from residence or abroad, are warmly welcome to check out us!
three.Q:What is the content of your products?
A: Only New substance can be utilised for our products.
Materia EPT for Generator: 100% Pure Crankcase, 100% Pure Copper Wire
Materia EPT for Water Pump: one hundred% Pure Auminium Pump body and Crankcase
4.Q:What is Minimum Order quantity?
A: MOQ 50/one hundred parts for distinct items.
You are welcomed to check with for particulars.
five.Q:What is the High quality Warranty for the goods?
A: Our items are primarily based on twelve-eighteen months good quality guarantee according to different quality spare elements because client obtained the products.
6.Q: What are the top quality guarantee contents?
A: The products will be strictly examined ahead of export
Non-human damage ,cost-free placecement parts
We offer on-line technical guidebook communication by way of email ,telephone ,vedio or chatting also EPT 24 several hours a day
Engineer is availabe to be abroad for right after-sale provider
From the internal areas to the outside packing, we not only make stHangZhourd quality test,but also think forward for a better resolution. Apart from firm QC program, We have reached CE & SONCAP certification.
Best supplier made in China – replacement parts – PTO shaft manufacturer & factory 5.5 international 1086 pto shaft removal HP 168f Four Stroke Gas Gasoline Engine with ce certificate top quality low price
We – EPG Group the largest agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
a thousand to 540 adapter EPG tesla generate shaft Machinery pto shaft trapped in tractor is john deere travel shaft failure situated one thousand rpm pto shaft adapter in massive moe’s drive shaft XiHu jr driveshafts Spot ford 8n pto shaft HangZhou insignia travel shaft Zhejiang pto shaft fix ontario ,China. It is 30km from our factory to HangZhou global airport. Our firm has reliable financial strength, builds up a technician staff contingent with substantial high quality, possesses the manufacturing assembly line of technicalization in China and ideal system examining on item top quality and runs advertising networks all through the region.
| Data for CAG Gasoline Engine | |||
| Model & HP | TG160(5.5HP) | TG200(6.5HP) | TG210(7HP) |
| Engine variety | OHV Air Cooled Single Cylinder | ||
| Bore× Stroke | 68x45mm | 68x54mm | 70x56mm |
| Displacement | 163cc | 196cc | 212cc |
| Compression ratio | eight.5: one | eight.5: 1 | 8.5: one |
| Starting method | Recoil | Recoil | Recoil |
| Velocity | 3000 / 3600rpm | 3000 / 3600rpm | 3000 / 3600rpm |
| Max output(kW/3600rpm) | 5.5HP | 6.5HP | 7.0HP |
| Rated output(kW/3600rpm) | 2.94 | three.sixty eight | 3.82 |
| Torque | 10.8N. m/2500rpm | 13N. m/2500rpm | 14N. m/2500rpm |
| Fuel consumption | 395g/kW. h | 395g/kW. h | |
| Fuel tank capacity | 3.6L | three.6L | three.6L |
| Oil capacity | .6L | .6L | .6L |
| N. W. /G. W. | fifteen/sixteen.5kg | sixteen/seventeen.5kg | 16/17.5kg |
| Dimension | 387x330x365mm | 387x330x365mm | 387x330x365mm |
| PTO shaft rotation | Counterclockwise(from PTO shaft side) | ||
| Optional | Electric start, PTO shaft, air cleaner | ||
• An efficient air cleaner program
• Compact in composition and modest in size
• Multi-selection PTO shafts(keyway shaft, thread shaft and taper shaft)
• Recoil or electrical start, with oil bathtub air filter
• Overhead valve (OHV) design and style, reduce operation temperature, strong drive and trustworthiness and longevity, and it saves more oil.
• C EPT iron casing does not only successfully increase lubrication but also can make the engine more put on-resist EPT and prolongs engine life.
• Computerized alarm and stop at a lower oil level, which prevents the motor to perform at minimal oil level and provides much more security to the engine.
• Metallic cam and solid crankshaft make the motor more reliable and resilient.